Brilliant Engineering Works

• Pressure Gauge: 0 - 1.6 bar
• Number of Holes: 121
• Diameter of Nozzle Holes: 0.5
• Material: Spray nozzle make of brass

Technical parameters:

• Testing time: Not less than 1min/(not less than 3 mins)
• Environment requirements: IP waterproof test room whose width is more than 3m
• The distance from jet nozzle to enclosure: 2.5~3m
• Pressure Gauge: 0 - 5 bar
• Reference standards: IEC60529
• Nozzle Material: Stainless Steel SS16
• Include: Pressure gauge, main body, nozzle IPX5 and IPX6, Shutup valve, Hose connector.

IEC60529 Spray water test Nozzle, IPX56 water Jet Nozzle

Test Set consists of a jet handle that is equipped with a pressure gauge and an easy-to-adjust flow valve.

The interchangeable nozzles assemble easily to the jet handle. The nozzles are made from stainless steel.

• Pressure Gauge: 0 - 1.6 bar
• Number of Holes: 121
• Diameter of Nozzle Holes: 0.5
• Material: Spray nozzle make of brass

• Technical parameters:

  No.	Item	parameter
  1	Water supply	Water flow rate is 50???150kpa clean water without inclusion.
  2	Spray nozzle parameters	external diameter: ??102mM spherical diameter: S??75.5mm There is a middle hole and There are 24 holes in the internal circle of holes of which the included angle is   30°. There are 96 holes in the external circle of holes of which the included angle is 15°. 121 holes in total. The hole diameter: ??0.5mm It is made of brass.
  3	Water flow	10L/min±5%,Flow meter is adjustable
  4	Range of pressure gauge	0???0.4Mpa
  5	Baffle	removable
  6	Pressure gauge	0~0.25MPa
  7	Site requirements	Dedicated IP waterproof test room,The ground should be flat with illumination With good function of inflow and drainage. Wall installation

   

• Pressure Gauge: 0 - 1.6 bar
• Number of Holes: 121
• Diameter of Nozzle Holes: 0.5
• Material: Spray nozzle make of brass

• Technical parameters:

  No.	Item	parameter
  1	Water supply	Water flow rate is 50???150kpa clean water without inclusion.
  2	Spray nozzle parameters	external diameter: ??102mM spherical diameter: S??75.5mm There is a middle hole and There are 24 holes in the internal circle of holes of which the included angle is   30°. There are 96 holes in the external circle of holes of which the included angle is 15°. 121 holes in total. The hole diameter: ??0.5mm It is made of brass.
  3	Water flow	10L/min±5%,Flow meter is adjustable
  4	Range of pressure gauge	0???0.4Mpa
  5	Baffle	removable
  6	Pressure gauge	0~0.25MPa
  7	Site requirements	Dedicated IP waterproof test room,The ground should be flat with illumination With good function of inflow and drainage. Wall installation

   

• The IPX3 and IPX4 Spray Nozzle is a hand-held test device to verify protection against spraying and splashing water.
  Pressure of water can be controlled by flow control valve.
  
  Specifications:
  
  
  • Pressure Gauge: 0 - 1.6 bar
  • Number of Holes: 121
  • Diameter of Nozzle Holes: 0.5
  • Material: Spray nozzle make of brass

  • Technical parameters:

    No.	Item	parameter
    1	Water supply	Water flow rate is 50???150kpa clean water without inclusion.
    2	Spray nozzle parameters	external diameter: ??102mM spherical diameter: S??75.5mm There is a middle hole and There are 24 holes in the internal circle of holes of which the included angle is 30°. There are 96 holes in the external circle of holes of which the included angle is 15°. 121 holes in total. The hole diameter: ??0.5mm It is made of brass.
    3	Water flow	10L/min±5%,Flow meter is adjustable
    4	Range of pressure gauge	0???0.4Mpa
    5	Baffle	removable
    6	Pressure gauge	0~0.25MPa
    7	Site requirements	Dedicated IP waterproof test room,The ground should be flat with illumination With good function of inflow and drainage. Wall installation